Firmware Updates CS-N575D | ONKYO Asia and Oceania Website

Firmware Updates

CS-N575D

 

Notice of Firmware Update for CS-N575D

A firmware update for the CS-N575D network CD receiver system is available through the unit's USB input. The latest update includes the following content:

Latest Firmware Number (16 digits):1400-7000-0000-0010

As of 1 August 2018

  • Enhanced security.
  • Adds support for Deezer HiFi.
  • Depending on the Firmware version, update will be needed 2 times.

As of 5 June 2018

  • Minor bug fixes and improvements stability.

As of 4 April 2018

  • Improve the noise during playback via USB/Network

As of 31 January 2018

  • Adds support of external audio inputs* for "FlareConnect".
    *For detail about external audio inputs, please refer to the link below.
    http://www.onkyo.com/flareconnect/
  • Minor bug fixes and improvements stability.

As of 30 October 2017

As of 14 September 2017

  • Adds support for DTS Play-Fi.
    *To use Play-Fi, you need to download the application.
    For more detailed information, Please refer to below.
    http://www.onkyo.com/manual/sup/upd/playfi_onk.pdf
    Before starting to use Play-Fi, set "On" at the "Network Standby" ("NET Stby") setting. The unit will automatically power on and change the selector to "NET" or "Network"
  • Adds ‘’Play Queue’’ function.
    For detail about updated function, please refer to the link below.
    http://www.onkyo.com/manual/sup/upd/queue_onk.pdf
  • Adds ‘’Search/ Sort’’ function on Music server.
  • Adds ‘’Resume Playback’’ function for Internet Radio.
  • Adds "Display WAV file information ( album art, artist, album ) via USB" function.
  • Adds ‘’Fast-Forward/ Fast-Reverse function on USB/ Music Server.
    Please note that only above functions are added this time. Please refer to the link below and find out the explanation of your related function.
    http://www.onkyo.com/manual/sup/upd/audio1709_na_onk.pdf
    Important notice: *The forementioned functions depend on model - not all functions are available for each model.
  • Minor bug fixes and improvements stability.

How to Check if Your Firmware Version is Up To Date

To Check if your firmware is up to date, Press MENU on remote -> Press UP and Down to select "Update" and press ENTER -> Press Up and Down to select "Version" and press ENTER and check the 16-digit number (xxxx-xxxx-xxxx-xxxx). If any numbers differ from the latest version available, please update your unit.

Precautions for CS-N575D Firmware Update

  • Please read the update instructions carefully before beginning.
  • The firmware update should take 30 to 40 minutes. Once the update begins, don't turn off the power supply to the CD receiver until it is time to restart it.
  • Depending on the conditions of the network, a firmware update via a network may take more than one hour or even fail to finish. If the update is not completed within two hours, turn off the power supply by pushing the ON/STANDBY button and then try updating again from the beginning.
  • Updating the firmware and adjusting the settings will be done automatically, but may take some time to complete. Please follow the procedures as instructed when you update. Note that the update may fail, or cause problems for your CD receiver, if you do any of the following:
  • Pull out the power cord;
  • Interrupt the power supply to the CD receiver (e.g. if the breaker is tripped or if there is an electrical outage);
  • Insert or remove the LAN cable from a device in your network when updating over a network;
  • Insert or remove a USB memory device from the CD receiver when updating via USB;

If your CD receiver is damaged for any of the reasons above, an Onkyo service center will repair the unit for a fee.

How to Install Firmware Update for CS-N575D

Click below and see chapter of "Firmware Update" on instruction manual.

Click below to download the firmware update to your PC, for subsequent installation on your receiver via its USB port.