Firmware Updates

TX-RZ720

Notice of Firmware Update for TX-RZ720

A firmware update for the TX-RZ720 network A/V receiver is available through the unit's USB input. The latest update includes the following content:

Latest Firmware Number (16 digits):1060-8010-2040-0008

As of 4 April 2018

  • Improve the noise during playback via USB/Network

As of 31 January 2018

  • Adds support of external audio inputs* for "FlareConnect".
    *For detail about external audio inputs, please refer to the link below.
    http://www.onkyo.com/flareconnect/
  • Minor bug fixes and improvements stability.

As of 30 October 2017

  • Adds support for new multi-room audio playback function "FlareConnect".
    *All audio devices in group and "Onkyo Controller" App is required to update to the latest version.
    Setup Guide: www.intl.onkyo.com/next_generation/setup.html
    Introduction of multi-room audio functions: www.intl.onkyo.com/next_generation
  • Improvement for pass-through function of Dolby Vision signal.
  • Minor bug fixes and improvements stability.

As of 31 August 2017

  • Adds support for DTS Play-Fi.
    *To use Play-Fi, you need to download the application.
    For more detailed information, Please refer to below.
    http://www.onkyo.com/manual/sup/upd/playfi_onk.pdf
    Before starting to use Play-Fi, set "On" at the "Network Standby" ("NET Stby") setting. The unit will automatically power on and change the selector to "NET" or "Network"
  • Expand playable content of DTS:X.
  • Adds ‘’Play Queue’’ function.
    For detail about updated function, please refer to the link below.
    http://www.onkyo.com/manual/sup/upd/queue_onk.pdf
  • Adds ‘’Search/ Sort’’ function on Music server.
  • Adds "Display WAV file information ( album art, artist, album ) via USB" function.
    Please note that only above functions are added this time. Please refer to the link below and find out the explanation of your related function.
    http://www.onkyo.com/manual/sup/upd/audio1709_na_onk.pdf
    Important notice: *The forementioned functions depend on model - not all functions are available for each model.
  • Minor bug fixes and improvements stability.

As of 9 May 2017

  • Adds support for Chromecast built-in.
    *Chromecast-enabled applications is required to enjoy Chromecast built-in.
    *As an initial setting, before starting to use Chromecast built-in, you need to accept the PRIVACY POLICY on our smartphone application "Onkyo Controller". For more detailed information, Please refer to below.
    http://www.onkyo.com/manual/sup/upd/chromecast_onk.pdf
  • Minor bug fixes and performance improvements.

How to Check if Your Firmware Version is Up To Date

To Check if your firmware is up to date, go into Home Menu ->Firmware Update and check the 12-digit number (xxxx-xxxx-xxxx). If any numbers differ from the latest version available, please update your unit.

Precautions for TX-RZ720 Firmware Update

  • Please read the update instructions carefully before beginning.
  • The firmware update should take 30 to 40 minutes. Once the update begins, don't turn off the power supply to the A/V receiver until it is time to restart it.
  • Depending on the conditions of the network, a firmware update via a network may take more than one hour or even fail to finish. If the update is not completed within two hours, turn off the power supply by pushing the ON/STANDBY button and then try updating again from the beginning.
  • Updating the firmware and adjusting the settings will be done automatically, but may take some time to complete. Please follow the procedures as instructed when you update. Note that the update may fail, or cause problems for your A/V receiver, if you do any of the following:
  • Pull out the A/V receiver's power cord;
  • Interrupt the power supply to the A/V receiver (e.g. if the breaker is tripped or if there is an electrical outage);
  • Insert or remove the LAN cable from a device in your network when updating over a network;
  • Insert or remove a USB memory device from the A/V receiver when updating via USB;
  • Operate components connected to the A/V receiver via HDMI, such as a TV or a recording device.

If your A/V receiver is damaged for any of the reasons above, an Onkyo service center will repair the unit for a fee.

How to Install Firmware Update for TX-RZ720

Click below for instructions on how to install the update.

Click below to download the firmware update to your PC, for subsequent installation on your receiver via its USB port.