Model Image
Color Variation Rear Panel Open Door Manual Download


Introduction
As Onkyo’s only module-based home network receiver, the THX Ultra2 certified TX-NR1000 gives you the freedom to configure your home theater exactly as you wish. It’s also the most powerful Onkyo receiver ever built, courtesy of its massive shielded toroidal transformer and high-capacity, low-ESR filter capacitors. That’s enough power to drive a large home theater connected to multiple A/V sources with an advanced display or projector. You can even assign 7.1-channel set-ups in two different rooms for two independent home theater environments. HDMI and i.LINK ports carry high-resolution, high-bandwidth digital video and audio signals. These transports are ably supported by digital and multichannel analog inputs to handle all surround sound formats, including Dolby® True HD and DTS-HD® Master Audio. Also, an Ethernet port enables Onkyo’s exclusive Net-Tune client processor to distribute digital music files on your PC—or internet radio—to up to 11 clients on the same network.
Features

Click each logo below for its explanation
HDMITHX Ultra2 THX Surround EXDTS (Digital Theater Systems), DTS ES, DTS 96/24 Dolby Digital EX and Dolby Pro Logic IIxDolby VIRTUAL SPEAKERDolby HeadphoneComponent Video Upconversioni LINK192 kHz/24-Bit D/A Audio Converter
VLSC (Vector Linear Shaping Circuitry)WRAT (Wide Range Amplifier Technology)Net-TunePowered Zone37.1 Multichannel Inputs for High-Definition DVD FormatsRI
THX™ Ultra2™ Certification
More About this Feature
7.1-Multichannel Inputs for High-Definition Audio
More About this Feature
Net-Tune™
More About this Feature

THX™ Ultra2™ Certified

THX™ Surround EX™, DTS®-ES™ Discrete/Matrix, DTS® Neo:6, DTS® 96/24, Dolby® Digital EX™, Dolby® Pro Logic® IIx, Dolby® Headphone, Dolby® Virtual Speaker

VLSC (Vector Linear Shaping Circuitry)

WRAT (Wide Range Amplifier Technology)

Net-Tune™ Function with MP3/WMA/WAV Playback

Modular Design

Ethernet Cable Plug-in Capability*

2 High-Quality HDMI Inputs and 1 Output

HDMI and Component Video Upconversion with TBC (Time Base Corrector)

HDTV-Capable HDMI and Component Video Switching

2 i.LINK Digital Ports

192 kHz/24-Bit DACs for All Channels

Speaker A and B Mode for 7.1 Channels

BTL and Bi-Wiring Connectable for FL/FR with SBL/SBR

Dual 32-Bit DSP Processing Chips

Powered Zone 2 and Zone 3

5 12 V Trigger Outputs and 3 IR Inputs/ Outputs

Bi-Directional RS232 Port for Interface Control

Color-Coded 7.1 Multichannel Inputs (Ready for Dolby® Digital and DTS® Audio Formats for High-Definition Discs) and Pre Outs

A/V Sync Control Function (Up to 300 ms)

2 Sets of Color-Coded Dual Banana Plug- Compatible Transparent Speaker Posts

Compatible with RI Dock for the iPod

Elegant Aluminum-Faced RI (Remote Interactive) Remote Control with Scroll Wheel and LCD Display

* For copyright protection purposes, it is not possible to make a digital output signal from Ethernet input signals.
General Specifications

300 W/Ch, Continuous 6 ohms, 1 kHz, 1 Channel Driven, JEITA

Frequency Response: 5 Hz–100 kHz (+1 dB, -3 dB)

WHD: 435 x 220 x 480.5 mm

Weight: 33.0 kg

INDEX > PRODUCTS > Network Components > Network Receivers > TX-NR1000